Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Hobart - Handler 190 MIG Welder
This product ad may change over time
ShareHobart - Handler 190 MIG Welder
Users say:
This welder is well-built and easy to use, with good penetration and strong welds. It is small enough to move around to needed areas and is suitable for a variety of projects. Customers are very satisfied with their purchase and would recommend it to family and friends.
Hobart - Handler 190 MIG Welder - DescriptionAn industrial performance welder that is spool gun ready for aluminum. Runs on 230V input power, welds up to 5/16 in. mild steel and is flux-cored or MIG ready.Special Features:7 voltage settings, with infinite wire feed speed controlAccepts uncomplicated, easy-to-install direct plug-in SpoolRunner 100 spoo…
Hobart - Handler 190 MIG Welder - DescriptionAn industrial performance welder that is spool gun ready for aluminum. Runs on 230V input power, welds up to 5/16 in. mild steel and is flux-cored or MIG ready.Special Features:7 voltage settings, with infinite wire feed speed controlAccepts uncomplicated, easy-to-install direct plug-in SpoolRunner 100 spool gunIntegrated spool gun control circuitry is standardDoor Chart with initial settingsBuilt-in contactorIndustrial cast aluminum wire drive systemConvenient polarity changeoverQuick Select drive rollShort circuit protectionSelf- resetting thermal overload protectionSelf-resetting motor protectionIncludes: Comfortable 10 ft. (3 m) H100S4-10 gun, Owner's manual with installation, operation and maintenance guidelines, 10 ft. (3 m) work cable with clamp, Built-in gas solenoid valve and dual-gauge regulator with gas hose., Spool hub assembly accommodates 4 or 8 in. spools, Sample spool of .030 in (0.8mm) self-shielding flux-cored wire, .030 in. (0.8mm) contact tips, Quick Select™ drive roll for .024 in (0.6mm) or .030/.035 in. (0.8/0/9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire, Power cord with plug, Welding guide and material thickness gauge, and Comfortable 10 ft. (3 m) HR-100 gun SpecificationsProcesses: Flux Cored (FCAW)MIG (GMAW)Amperage: 25 A - 190 AMaterial Thickness: Mild Steel 24 ga. (0.5 mm) - 5/16 in. (7.9 mm)Weldable Metals:AluminumStainless SteelSteelInput Voltage: 220/230/240 V Input Phase: 1-PhaseInput Hz: 60 HzCurrent Type: DCRated Output: 30% @ 130A Max Open Circut Voltage: 31 VDCWire Feed Speed: 40 IPM - 740 IPM Wire Diameter:Stainless 0.024 in. - 0.035 in.Stainless 0.6 mm. - 0.9 mm.Solid Steel 0.6 mm. - 0.9 mm.Solid Steel 0.024 in. - 0.035 in.Flux Cored 0.03 in. - 0.045 in.Flux Cored 0.8 mm. - 1.2 mm. Welding, MIG (GMAW), MIG Welders, Hobart, Hobart - Handler 190 MIG Welder, Welding Supplies
Review summary
AI-generated content
This welder is well-built and easy to use, with good penetration and strong welds. It is small enough to move around to needed areas and is suitable for a variety of projects. Customers are very satisfied with their purchase and would recommend it to family and friends.
Pros
- Strong welds
- Good penetration
- Easy to set up
Read original reviews
Description
Hobart - Handler 190 MIG Welder - DescriptionAn industrial performance welder that is spool gun ready for aluminum. Runs on 230V input power, welds up to 5/16 in. mild steel and is flux-cored or MIG ready.Special Features:7 voltage settings, with infinite wire feed speed controlAccepts uncomplicated, easy-to-install direct plug-in SpoolRunner 100 spool gunIntegrated spool gun control circuitry is standardDoor Chart with initial settingsBuilt-in contactorIndustrial cast aluminum wire drive systemConvenient polarity changeoverQuick Select drive rollShort circuit protectionSelf- resetting thermal overload protectionSelf-resetting motor protectionIncludes: Comfortable 10 ft. (3 m) H100S4-10 gun, Owner's manual with installation, operation and maintenance guidelines, 10 ft. (3 m) work cable with clamp, Built-in gas solenoid valve and dual-gauge regulator with gas hose., Spool hub assembly accommodates 4 or 8 in. spools, Sample spool of .030 in (0.8mm) self-shielding flux-cored wire, .030 in. (0.8mm) contact tips, Quick Select™ drive roll for .024 in (0.6mm) or .030/.035 in. (0.8/0/9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire, Power cord with plug, Welding guide and material thickness gauge, and Comfortable 10 ft. (3 m) HR-100 gun SpecificationsProcesses: Flux Cored (FCAW)MIG (GMAW)Amperage: 25 A - 190 AMaterial Thickness: Mild Steel 24 ga. (0.5 mm) - 5/16 in. (7.9 mm)Weldable Metals:AluminumStainless SteelSteelInput Voltage: 220/230/240 V Input Phase: 1-PhaseInput Hz: 60 HzCurrent Type: DCRated Output: 30% @ 130A Max Open Circut Voltage: 31 VDCWire Feed Speed: 40 IPM - 740 IPM Wire Diameter:Stainless 0.024 in. - 0.035 in.Stainless 0.6 mm. - 0.9 mm.Solid Steel 0.6 mm. - 0.9 mm.Solid Steel 0.024 in. - 0.035 in.Flux Cored 0.03 in. - 0.045 in.Flux Cored 0.8 mm. - 1.2 mm. Welding, MIG (GMAW), MIG Welders, Hobart, Hobart - Handler 190 MIG Welder, Welding Supplies
Feedback