Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Hobart - Handler 125 MIG Welder
This product ad may change over time
ShareHobart - Handler 125 MIG Welder
Hobart - Handler 125 MIG Welder - DescriptionA reliable, portable wire feed welder thats perfect for a variety of projects. Runs on 120V input power, welds up to 3/16 in. mild steel, and is MIG capable with a built-in gas valve. Special Features:Four output voltage settingsFactory-installed gas solenoidBuilt-in contactorDurable feed head with quick-releas…
Hobart - Handler 125 MIG Welder - DescriptionA reliable, portable wire feed welder thats perfect for a variety of projects. Runs on 120V input power, welds up to 3/16 in. mild steel, and is MIG capable with a built-in gas valve. Special Features:Four output voltage settingsFactory-installed gas solenoidBuilt-in contactorDurable feed head with quick-release drive roll tension leverSpool hub assembly accommodates 4- or 8- inch spoolsSelf- resetting thermal overload protectionBroad output range of 25 130 Amps.Included: Comfortable 8 ft. (2.4 m) H-9D gun with liner for .030-.035 in. (0.8 -0.9 mm) diameter wire., Work cable with clamp, (2) - 0.030 (0.8 mm) contact tips, Power cord with molded plug, Weld set -up chart, and Owners manual with installation, operation and maintenance guidelines. SpecificationsProcesses: MIG (GMAW)Flux-Cored (FCAW)Material Thickness: Mild Steel 24 ga. (0.8 mm) - 3/16 in. (4.8 mm) Weldable Metals:Stainless SteelSteelInput Voltage: 110/115/120 V Input Phase: 1-PhaseCurrent Type: DCRated Output: 80A @ 20% Duty CycleMax Open Circuit Voltage: 28 VDC Wire Feed Speed: 88 IPM - 545 IPM Wire Diameter:Solid Steel 0.024 in. - 0.03 in.Flux Cored 0.03 in. - 0.035 in.Flux Cored 0.8 mm. - 0.9 mm.Weld Output: CV. Welding, MIG (GMAW), MIG Welders, Hobart, Hobart - Handler 125 MIG Welder, Welding Supplies
Description
Hobart - Handler 125 MIG Welder - DescriptionA reliable, portable wire feed welder thats perfect for a variety of projects. Runs on 120V input power, welds up to 3/16 in. mild steel, and is MIG capable with a built-in gas valve. Special Features:Four output voltage settingsFactory-installed gas solenoidBuilt-in contactorDurable feed head with quick-release drive roll tension leverSpool hub assembly accommodates 4- or 8- inch spoolsSelf- resetting thermal overload protectionBroad output range of 25 130 Amps.Included: Comfortable 8 ft. (2.4 m) H-9D gun with liner for .030-.035 in. (0.8 -0.9 mm) diameter wire., Work cable with clamp, (2) - 0.030 (0.8 mm) contact tips, Power cord with molded plug, Weld set -up chart, and Owners manual with installation, operation and maintenance guidelines. SpecificationsProcesses: MIG (GMAW)Flux-Cored (FCAW)Material Thickness: Mild Steel 24 ga. (0.8 mm) - 3/16 in. (4.8 mm) Weldable Metals:Stainless SteelSteelInput Voltage: 110/115/120 V Input Phase: 1-PhaseCurrent Type: DCRated Output: 80A @ 20% Duty CycleMax Open Circuit Voltage: 28 VDC Wire Feed Speed: 88 IPM - 545 IPM Wire Diameter:Solid Steel 0.024 in. - 0.03 in.Flux Cored 0.03 in. - 0.035 in.Flux Cored 0.8 mm. - 0.9 mm.Weld Output: CV. Welding, MIG (GMAW), MIG Welders, Hobart, Hobart - Handler 125 MIG Welder, Welding Supplies
Feedback