Product Image
Saved
Save to wishlist

Share this product

Marshall DSL40CR 1 X 12-Inch 40-Watt Tube Combo Amp 40-Watt, 1X12" Tube Guitar Combo Amplifier With 2 Channels (Each With 2 Modes), High/Low Power
This product ad may change over time
Share ProductShare

Marshall DSL40CR 1 X 12-Inch 40-Watt Tube Combo Amp 40-Watt, 1X12" Tube Guitar Combo Amplifier With 2 Channels (Each With 2 Modes), High/Low Power

Compare Products Icon
Generating AI insights...
Compare Products Icon
Marshall's Legendary DSL Is Back in Action. Tap into burly Marshall tone anywhere from your bedroom to the stage, with the Marshall DSL40CR tube combo amp. With per-channel Gain and Volume controls, a dedicated Resonance control, reverb, and an effects loop, the Marshall DSL40CR is ready to gig. And with its adjustable power level, you c…
Marshall's Legendary DSL Is Back in Action. Tap into burly Marshall tone anywhere from your bedroom to the stage, with the Marshall DSL40CR tube combo amp. With per-channel Gain and Volume controls, a dedicated Resonance control, reverb, and an effects loop, the Marshall DSL40CR is ready to gig. And with its adjustable power level, you can dial in cranked-amp tones that won't wake your neighbors - or even use the Softube speaker-emulated output for direct recording and monitoring. Marshall even refined the EQ section for extremely versatile tone shaping. From glassy cleans to bone-rattling crunch to blistering high gain, your wish is the Marshall DSL40CR's command.A 40-watt tone beast. Marshall's DSL40CR is an all-tube, twin-channel workhorse capable of conjuring any classic Marshall sound - past or present. Four ECC83s in the preamp section (in concert with the amp's gain/master volume arrangement) give you stunning tone-shaping mojo, and with two EL34s in the engine room, you have the volume to rule any club in the world.Sporting the same tubes (minus two EL34s) and feature set as the original DSL100, this little beast has critical upgrades that give you even more control over your sound. A Resonance control (as opposed to the original's fixed deep switch) lets you dial in your preferred amount of low-end girth. You also get studio-grade digital reverb (instead of spring), high and low power settings, and a bypassable rear-panel series effects loop. The Marshall DSL40CR even has a 2-way footswitch for channel switching and reverb on/off.The DSL series - a revered tonal heritage. The Marshall DSL40CR tube combo amp hails from a revered lineage. Marshall introduced the JCM2000 Dual Super Lead (DSL) series amps in 1997. Right from the get-go, these all-tube monsters enjoyed enthusiastic approval by guitarists and the press alike, forming the backlines of top acts in all musical genres and bludgeoning audiences worldwide for a decade before being replaced by Marshall's JVM series (a musical powerhouse in its own right). Considered the go-to rock amp by many tone-savvy guitarists, there is considerable pent-up demand for Dual Super Leads. And thus, Marshall is proud to introduce the new-and-improved DSL series with the Marshall DSL40CR.Softube speaker-emulated output. Marshall has teamed up with software mavens Softube to create exceptional tones in their CODE series of amplifiers, and they've joined forces again on the DSL40CR tube combo amp. Its line output features an accurate emulation of Marshall's iconic 1960 speaker cabinet, allowing you to plug directly into a recording chain with confidence. Guitarists at Sweetwater love flexible recording options, and the Marshall DSL40CR delivers.Marshall DSL40CR Tube Combo Amp Features:. Capable of conjuring any classic Marshall sound - past or present. 2 channels - Classic Gain and Ultra Gain. Each channel features two modes - Clean/Crunch and OD1/OD2, respectively. High and low power modes allow you to dial in appropriate volume for any setting. Line output with Softube's accurate emulation of a Marshall 1960 cab. Highly effective Resonance control replaces the original's fixed deep switch. Refined EQ section gives you incredible tonal flexibility. Studio-grade digital reverb. Bypassable rear-panel series effects loop. Included 2-way footswitch for channel switching and reverb on/off. Guitar Amps - Guitar Combo Amps - Marshall DSL40CR 1 x 12-inch 40-watt Tube Combo Amp
See more below

Something went wrong. Please try again later.

S
Sweetwater
Ad
$949.99
Visit site
Get answers

AI-powered Review Insight

Review summary

This amp is a powerful classic that sounds great when muting. It is easy to use and has a variety of channels to choose from. It is also portable and has a soft, strong build. It is perfect for playing AC/DC, Metallica, Poison, and other heavy metal.

Pros

  • Easy-to-use controls
  • Works well with pedals
  • Sturdy construction
  • Versatile for various music styles

Cons

  • Poor stock speaker quality
  • Limited volume control

Description

Marshall's Legendary DSL Is Back in Action. Tap into burly Marshall tone anywhere from your bedroom to the stage, with the Marshall DSL40CR tube combo amp. With per-channel Gain and Volume controls, a dedicated Resonance control, reverb, and an effects loop, the Marshall DSL40CR is ready to gig. And with its adjustable power level, you can dial in cranked-amp tones that won't wake your neighbors - or even use the Softube speaker-emulated output for direct recording and monitoring. Marshall even refined the EQ section for extremely versatile tone shaping. From glassy cleans to bone-rattling crunch to blistering high gain, your wish is the Marshall DSL40CR's command.A 40-watt tone beast. Marshall's DSL40CR is an all-tube, twin-channel workhorse capable of conjuring any classic Marshall sound - past or present. Four ECC83s in the preamp section (in concert with the amp's gain/master volume arrangement) give you stunning tone-shaping mojo, and with two EL34s in the engine room, you have the volume to rule any club in the world.Sporting the same tubes (minus two EL34s) and feature set as the original DSL100, this little beast has critical upgrades that give you even more control over your sound. A Resonance control (as opposed to the original's fixed deep switch) lets you dial in your preferred amount of low-end girth. You also get studio-grade digital reverb (instead of spring), high and low power settings, and a bypassable rear-panel series effects loop. The Marshall DSL40CR even has a 2-way footswitch for channel switching and reverb on/off.The DSL series - a revered tonal heritage. The Marshall DSL40CR tube combo amp hails from a revered lineage. Marshall introduced the JCM2000 Dual Super Lead (DSL) series amps in 1997. Right from the get-go, these all-tube monsters enjoyed enthusiastic approval by guitarists and the press alike, forming the backlines of top acts in all musical genres and bludgeoning audiences worldwide for a decade before being replaced by Marshall's JVM series (a musical powerhouse in its own right). Considered the go-to rock amp by many tone-savvy guitarists, there is considerable pent-up demand for Dual Super Leads. And thus, Marshall is proud to introduce the new-and-improved DSL series with the Marshall DSL40CR.Softube speaker-emulated output. Marshall has teamed up with software mavens Softube to create exceptional tones in their CODE series of amplifiers, and they've joined forces again on the DSL40CR tube combo amp. Its line output features an accurate emulation of Marshall's iconic 1960 speaker cabinet, allowing you to plug directly into a recording chain with confidence. Guitarists at Sweetwater love flexible recording options, and the Marshall DSL40CR delivers.Marshall DSL40CR Tube Combo Amp Features:. Capable of conjuring any classic Marshall sound - past or present. 2 channels - Classic Gain and Ultra Gain. Each channel features two modes - Clean/Crunch and OD1/OD2, respectively. High and low power modes allow you to dial in appropriate volume for any setting. Line output with Softube's accurate emulation of a Marshall 1960 cab. Highly effective Resonance control replaces the original's fixed deep switch. Refined EQ section gives you incredible tonal flexibility. Studio-grade digital reverb. Bypassable rear-panel series effects loop. Included 2-way footswitch for channel switching and reverb on/off. Guitar Amps - Guitar Combo Amps - Marshall DSL40CR 1 x 12-inch 40-watt Tube Combo Amp

Specifications

Dimensions9.9"
EffectsClassic, Ultra
FootswitchableYes, 2-button Footswitch (Optional 6-way Sold Separately)
Power Output40w (20w Power Setting)
Footswitch I/o1 X 1/4" (Channel, Effects Loop)
Height19.29"
Number Of Channels2-channel (2 Modes Each)
Midi I/oIn
Construction MaterialBlack Tolex
Inputs1 X 1/4" (Instrument), 1 X 1/8" (Aux In)
Weight50.4 Lbs.
Speaker Size1 X 12" Celestion V-type Speaker
Effects LoopYes
Bias TypeAdjustable Fixed
TypeTube
Power SourceStandard Iec Ac Cable
Preamp Tubes4 X Ecc83
Power Tubes2 X El34
Eq3-band Eq, Tone Shift, Resonance
Width24.4"
Manufacturer Part NumberM-dsl40cr-u

Goes well with

Ads

Sponsored similar products

Ads

Price History

Something went wrong. Please try again later.

    • Combo Amps | Musician's Friend | Lowest Price Guaranteed

    • Marshall Amps at Sweetwater | Best Online Instrument Store

  • Product added to your wishlist! View wishlist
    Sign in to see your saved products on any device
    Product removed from your wishlist! View wishlist
    Sign in to see your saved products on any device
    Something went wrong. Please try again later.
    Product is added to compare already. Please refresh the page.
    Product is not found in compare. Please refresh the page.
    5 Products already added. Please delete existing selection to add this.