Share this product

Save 45% on Hatco C-6 Compact Booster Water Heater, 6 Gallon, 6 kW, 240v/3ph, Stainless Steel

This product ad may change over time

Share

Hatco C-6 Compact Booster Water Heater, 6 Gallon, 6 kW, 240v/3ph, Stainless Steel

The Booster Heaters by Hatco: Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 6-KW, stainless steel front panel, powder-coated silver-gray hammertone body, 6 plastic non-adjustable legs, Castone tank, 240v/60/3-ph, NSF, cUL, UL ( Hatco - C-6 ) - Ensuring that sanitizing water reaches 180 degrees Fahrenheit, t…

New content will be added above the current area of focus upon selection

The Booster Heaters by Hatco: Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 6-KW, stainless steel front panel, powder-coated silver-gray hammertone body, 6 plastic non-adjustable legs, Castone tank, 240v/60/3-ph, NSF, cUL, UL ( Hatco - C-6 ) - Ensuring that sanitizing water reaches 180 degrees Fahrenheit, the Hatco C-6 compact booster water heater can be installed close to the dish pit on the included 6-inch legs or with slide mounting brackets, which are sold separately. For proper operation, this unit includes a temperature relief valve and a pressure reducing valve as well as accessible probes and elements for servicing. This booster can be monitored with its two gauges, pilot indicator light, and a calibrated immersion thermostat.The Hatco C-6 compact booster water heater is insulated with fiberglass to prevent heat loss and lined with Castone® to reduce limestone buildup. Its body is powder coated with silver hammertone, so it is durable and corrosion resistant. To keep the unit and its users safe, this booster includes a low-water cut-off and a high-temperature limit control. Equipped with a 6-gallon capacity, this booster heater is factory pre-plumbed and pre-wired for quick installation. Product Details. 6-gal. capacity. Heats water to the required 180 degrees F. Maximum 60 GPH at 40-degree-F rise. Maximum 34 GPH at 70-degree-F rise. Silver powder-coated hammertone body. Stainless steel swing panel for probe and element access. Fiberglass insulation. Castone-lined, limescale-resistant tank. 2 pressure gauges. Temperature relief valve. Pressure reducing valve. Pilot indicator light. High-temperature limit control. Low-water cut-off. Calibrated immersion thermostat. 6-in. legs. Mountable on sliding brackets (not included). On/off switch. 3/4-in. NPT pipe. Fittings for water inlet and outlet. Dimensions & Utilities. 13.06 in. W x 26 in. D x 19.78 in. H. 21.6 A, 6 kW. 240 V/60 Hz/3 ph.

See more below

K

KaTom Restaurant Supply, Inc.

$2368.30$4306.00

Visit site

Description

The Booster Heaters by Hatco: Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 6-KW, stainless steel front panel, powder-coated silver-gray hammertone body, 6 plastic non-adjustable legs, Castone tank, 240v/60/3-ph, NSF, cUL, UL ( Hatco - C-6 ) - Ensuring that sanitizing water reaches 180 degrees Fahrenheit, the Hatco C-6 compact booster water heater can be installed close to the dish pit on the included 6-inch legs or with slide mounting brackets, which are sold separately. For proper operation, this unit includes a temperature relief valve and a pressure reducing valve as well as accessible probes and elements for servicing. This booster can be monitored with its two gauges, pilot indicator light, and a calibrated immersion thermostat.The Hatco C-6 compact booster water heater is insulated with fiberglass to prevent heat loss and lined with Castone® to reduce limestone buildup. Its body is powder coated with silver hammertone, so it is durable and corrosion resistant. To keep the unit and its users safe, this booster includes a low-water cut-off and a high-temperature limit control. Equipped with a 6-gallon capacity, this booster heater is factory pre-plumbed and pre-wired for quick installation. Product Details. 6-gal. capacity. Heats water to the required 180 degrees F. Maximum 60 GPH at 40-degree-F rise. Maximum 34 GPH at 70-degree-F rise. Silver powder-coated hammertone body. Stainless steel swing panel for probe and element access. Fiberglass insulation. Castone-lined, limescale-resistant tank. 2 pressure gauges. Temperature relief valve. Pressure reducing valve. Pilot indicator light. High-temperature limit control. Low-water cut-off. Calibrated immersion thermostat. 6-in. legs. Mountable on sliding brackets (not included). On/off switch. 3/4-in. NPT pipe. Fittings for water inlet and outlet. Dimensions & Utilities. 13.06 in. W x 26 in. D x 19.78 in. H. 21.6 A, 6 kW. 240 V/60 Hz/3 ph.